Standard fascia – three or four sided, Safety upgrade instructions – Valor Auto Companion Inc. Valor Legend Ultra 837 AN User Manual
Page 2
Advertising
Safety Upgrade Instructions
Page 2
Figure 4. Fascia Removal on Cast Iron and
Standard fascia.
Figure 3. Removal of Screws on cast Iron fascia.
Standard fascia – three
or four sided.
1.
Unscrew and remove
the ignition bar knob
(See figure 1).
2.
Remove the Fascia by
gentle pulling the top
of the fascia forward.
Two retaining clips
hold the top of the fascia. Once
clear of these the fascia can be
lifted clear of the lower bottom
fascia brackets (See figure 4).
Advertising
This manual is related to the following products: