Valor Auto Companion Inc. Valor Legend Ultra 837 AN - Manual (Page 8)

Safety Upgrade Instructions
Page 8
Figure 13 Ignition bar adjustment screw
3. If the ignition bar does not
locate satisfactorily
through the fascia, loosen
the screw securing the
ignition bar sleeve (figure.
13).
4. Adjust the height of the
ignition bar so that it can
rotate freely through the
slot. Retighten the sleeve
screw.
5. The thermostat wheel
height can be adjusted by
simply sliding it up or
down the spindle and the
tightening the bushing
below so that it is flush
against the wheel (figure
13)
6. Remove the fascia.