Vision Fitness T9800 Series - Manual (Page 6)

6
3
STEP
3
STEP
• Insert the handlebar cover onto the
handlebar. Insert the right handlebar
by holding the handlebar sideways
toward the treadmill and inserting the
top into the console. Rotate the
handlebar into the bracket located on
the console mast. Fasten with a bolt
(M5x12L), and a bolt (M6x15L socket
head) & an arc washer (6x13x2T) into
the two holes of the console plastic,
and a bolt (M8x15L flat head) into the
hole in the handlebar. Fasten a bolt
(M6x15L socket head) and a flat washer
(6x20x2T) into the hole in the handlebar
on the console mast. Do not fully tighten
the bolts.
• Slide the handlebar cover over the
bracket and secure with a bolt
(M6x15L socket head) and a flat
washer (6x20x2T). Do not fully tighten
the bolt.
• Repeat on the left side.
• Fully tighten the console and
handlebar bolts.
PINK BAG
4
STEP
• Place the motor cover back on the
frame and fasten with 6 screws.
• Attach the power cord to the treadmill.
• Plug the power cord into the power
outlet.
MOTOR COVER
4
STEP