Remote control descriptions cont, Using the remote control, When to replace the batteries – VocoPro Voco user guide portable speaker User Manual

Page 14: Installing the batteries, Remote control

Advertising
background image

13

23 feet

27. VOCAL PARTNER button - This feature acts

very similar to the vocal cancel feature, but with

an added voice activation feature that acts

like a vocal “auto-pilot”. When you utilize the

VOCAL PARTNER feature, the lead vocal layer

will be removed as long as you are singing into

the microphone. When you stop singing into

the microphone, the lead vocal layer will

automatically be added back into the music. To

activate VOCAL PARTNER, press button once.

To remove VOCAL PARTNER, press a second

time.

NOTE: If you try to utilize this feature while a

standard or non-multiplex disc is playing, it will

not work as this feature is designed to work on

multiplex format discs only.

Using the Remote Control

When operating the remote control, point the top

of the remote control toward the GIG MAN PLUS’

remote sensor on the front panel and ensure that

there is a clear line of sight between the remote

control and GIG MAN PLUS’ void of obstacles in

order to prevent signal deflection

When to replace the batteries

The maximum operational distance between the

remote control and the sensor is approximately 23

feet. If the remote only operates at shorter

distances, it is time to replace the batteries.

Installing the batteries

To install the batteries, first remove the battery

compartment lid from the back of the remote

control. Insert two AAA batteries, ensuring that the

polarities are aligned correctly.

Remote control descriptions cont

27

26

VIDEO

AUTO

SLOW

AM/FM

PRESETS

AUDIO

ST/MO

CANCEL

AV1

DISC

VOCAL

AV2

TUNER

PARTNER

PRESET/SEARCH

Remote Control

26. VOCAL CANCEL button - This feature is used to cancel

out the lead vocal layer on a 2-channel multiplex CD+G or

VCD disc. In order for this feature to work properly, the

disc must be multiplex formatted. Press the VOCAL

CANCEL button once to remove the lead vocal layer.

Press a second time, and the lead vocal layer will be

reestablished.

NOTE: If you try to utilize this feature while a standard or

non-multiplex disc is playing, it will not work as this

feature is designed to work with multiplex format discs

only.

Advertising