VocoPro Voco user guide portable speaker - Manual (Page 28)

27
Check the source player input channel and
ensure the input selector is set to that channel.
If external speakers are connected, set the
speaker selector to EXT. If no external
speakers are connected, select INT.
Checks overall cabling and viability of external
equipment.
Plug the power cord from the GIG MAN PLUS
to a wall outlet.
Use an external RF Modulator.
Increase space between microphone and
speakers.
Turn down microphone or guitar volume.
Lower the treble levels.
Try other MP3/JPEG encoding software or disc
writing software for writing the discs.
The input selector is not set to the channel
that the active source player is connected
to.
The speaker selector is not set correctly.
Faulty connection within external
components or external component failure.
The power cord to the GIG MAN PLUS is
not plugged in.
Your TV does not have RCA style A/V input
jacks.
An open microphone or guitar is too close to
the output speakers.
Microphone or guitar volume is too high.
Excessive treble is applied.
The MP3/Photo-CD either has files that are
not standard-formatted, or the disc was not
standard-copied.
No audio output.
Unable to connect the GIG MAN
PLUS to my television monitor with the
RCA cable provided.
There is a loud "squealing" noise
coming from the speakers.
An MP3 or Photo-CD does not play in
the GIG MAN PLUS.
Troubleshooting