Front panel descriptions, Front panel – VocoPro Voco user guide portable speaker User Manual

Page 8

Advertising
background image

7

1. POWER button - This button is used to turn the GIG MAN PLUS ‘ON’ or place it in STANDBY mode.

NOTE: When in STANDBY mode, the GIG MAN PLUS is not completely powered down and it still contains residual

power.

2. INPUT button - This button toggles through all of the INPUT channels (DISC, TUNER, AV1, AV2) for available INPUT

SOURCES.

3. 7-BAND GRAPHIC EQUALIZER - This GRAPHIC EQ is used to BOOST and/or CUT particular frequencies from

SOURCE MUSIC output. Each slide fader processes a particular frequency range indicated by the number above it.

Frequencies from 30Hz - 120Hz constitute the very low to low range. Frequencies from 120Hz to 1kHz are the mid-

range and frequencies from 1kHz to 16kHz make up the high to very high range. To adjust, slide the fader up to

boost the frequency presence or down to cut the frequency presence.

4. GRAPHIC DISPLAY panel - This panel displays all graphical information regarding system operations, settings and

performance.

5. DIRECT TRACK ACCESS buttons - These buttons allow for DIRECT TRACK selection. For tracks 10 and up, press

the +10 button. For example, to go directly to track 13, you would press +10 and 3, and for track 22, you would

press +10, +10 and 2.

6. REMOTE SENSOR - This sensor receives infrared signals transmitted by the REMOTE CONTROL transmitter.

NOTE: Obstacles located between the remote control and remote sensor should be avoided as they can prevent

signal recognition.

7. BASS control - This control increases/decreases the amount of LOW frequency response applied to the MASTER

VOLUME output.

8. TREBLE control - This control increases/decreases the amount of HIGH frequency response applied to the

MASTER VOLUME output.

9. ECHO LEVEL control - This control adjusts the level of ECHO applied to the MIC channels. Turn control clockwise to

INCREASE and counter-clockwise to DECREASE level.

10. REPEAT control - Use this control to adjust the REPEAT setting of the ECHO effect. As REPEAT adjusts the total

number of echo intervals prior to fade-out, the more REPEAT that is applied, the more ECHO intervals will occur

prior to fade-out. Turn control clockwise to INCREASE and counter-clockwise to DECREASE level.

Front panel descriptions

GIG MAN PLUS

PROFESSIONAL KARAOKE ENTERTAINMENT SYSTEM

MUSIC EQ

MUSIC VOLUME

AV2 INPUT

PLAY

STOP

PBC

AM/FM

PRESET

SEARCH

AUTO

ST/MO

PREV

NEXT

B-SCAN

F-SCAN

MUTE

L/R

EJECT

DIGITAL KEY CONTROLLER

VOCAL
CANCEL

VOCAL
PARTNER

REPEAT

EQ ON

EQ OFF

PAUSE

DISC

TUNER

AV1

AV2

INPUT

POWER

+12dB

0dB

-12dB

+12dB

0dB

-12dB

60Hz 200Hz 400Hz 1KHz

3KHz

6KHz

16KHz

60Hz 200Hz 400Hz 1KHz

3KHz

6KHz

16KHz

HEADPHONES

KEYBOARD

GUITAR

MIC VOLUME

MIC EFFECTS

VOL2

VOL1

MIC2

MIC1

BASS

TREBLE

ECHO

REPEAT

DELAY

1

2

3

4

5

6

7

8

9

10

+10

VOLUME

VOLUME

VOLUME

PRESETS

1

2

3

4

5

6

7

8

9

10

Front Panel

Advertising