VocoPro Voco user guide portable speaker - Manual (Page 17)

16
AV Input Connections
To connect an AV source player, use an RCA-type AV cable with red, white and yellow colored plugs.
For AUDIO, connect the L and R AUDIO OUTPUT jacks from the source player to the L (white) and R (red) AUDIO INPUT
jacks on the GIG MAN PLUS, using the AV channel of your choice.
For VIDEO, connect the VIDEO OUTPUT jack on the source player to the yellow VIDEO INPUT jack on the GIG MAN PLUS,
using the same channel you connected the audio to.
Audio Output Connections
To connect audio output to external devices, there are three available channels: AUDIO OUTPUT 1 & 2 (RCA) and BAL-
ANCED AUDIO OUTPUT (XLR). All three OUTPUTS can be connected simultaneously
For AUDIO OUTPUT 1 & 2, using an RCA-type audio cable, connect the left and right AUDIO/LINE/AUX INPUT jacks on
the external device to the left and right AUDIO OUTPUT 1 or 2 jacks on the GIG MAN PLUS.
For BALANCED AUDIO OUTPUT, using two XLR-type audio cables, connect the left and right AUDIO/LINE IN jacks on the
external device to the left and right BALANCED AUDIO OUTPUT jacks on the GIG MAN PLUS’ rear panel.
Video Output Connections
The GIG MAN PLUS has two VIDEO OUTPUT channels with RCA-type jacks for connection to TV’s or monitor devices.
To connect VIDEO, using an RCA-type patch cable, connect the VIDEO IN jack of your television or monitor device to
either the VIDEO OUT 1 or 2 jacks on the GIG MAN PLUS. Both VIDEO OUTPUTS can be connected simultaneously
Getting connected
POWERED STAGE
MONITORS
VIDEO
OUT
AUDIO
OUT
L R
To Audio In To Audio In
External Amplifier
Recording Device
AUDIENCE
TV
To Video In
VIDEO
OUT
AUDIO
OUT
L
R
STAGE
TV
To Video In
A /V D e v ic e
To Audio Out
AV2 INPUT
To Video Out
To Audio In
To Video In
AV Input
Audio Output
Video Output