VocoPro Voco user guide portable speaker - Manual (Page 20)

19
Preparing a Disc for Playback
Turn the power on by pressing the POWER button on the front panel. Press the OPEN/CLOSE button to open the disc
tray. Insert a disc into the round recess in the tray with the label side up.
Playing a Disc
Press the PLAY/PAUSE button on the front panel or the remote control to begin disc playback. Press the PREV/NEXT
buttons to skip to the beginning of the previous or next track. Press the STOP button to cease playback of the disc.
Selecting a Playback Starting Point
To select a playback starting point, press the GOTO button on the Remote Control. Using the 0-9 number keys, enter the
start point in minutes and seconds format (for example 3320 to start playback at 33 minutes and 20 seconds from the
start of the disc). Playback will start automatically when the last digit is entered.
Customizing Audio Playback for MPX Media
Multiplexed discs are specially recorded so that the vocals can be removed for Karaoke. These discs are recorded with
the vocals on the right channel only. When the right channel is bypassed and the left channel is split to both sides, the
vocals disappear, leaving the music only. The AUDIO button on the GIG MAN PLUS’ front panel and remote control allows
you to select through 3 audio playback modes: LEFT CHANNEL ONLY, RIGHT CHANNEL ONLY AND BOTH (STEREO). To
select, press the AUDIO button repeatedly.
Muting Playback
Pressing the MUTE button on the remote control silences the audio during playback of a disc. Press the MUTE button
again or either of the VOLUME buttons to restore audio playback.
Displaying the Remaining Time
While the disc is playing, pressing the OSD button on the remote control will display the disc’s playback status. Press the
OSD button to cycle between TRACK TIME REMAINING and DISC TIME REMAINING.
Programming a Playback Sequence
Press the PROGRAM button to enter PROGRAM mode. Using the number buttons (0-10, +10), enter the track numbers
to be played. Press the PLAY button to begin playback of the programmed sequence. Note: Program mode cannot be
entered while a disc is playing.
Repeat Playback
To repeat a track/scene press REPEAT once.
To repeat a disc/title press REPEAT twice.
To cancel REPEAT mode, either press the PLAY button, or cycle through the REPEAT options till REPEAT is turned OFF.
Repeating a Segment Using the A-B Feature
The starting point of the LOOP region is immediately commenced after pushing A-B. Press the A-B button again to estab-
lish the LOOP ending point.
To cancel the A-B loop Press the A-B button a third time.
Note: You cannot search and skip tracks while using the A-B feature.
Programmed Playback
You can select up to 99 tracks to program. The program is maintained until the STOP button is pressed twice or the unit
is turned on or off.
Use the number buttons to select a track. Once selected, press PROGRAM to enter it into the program. Repeat this
procedure till you are complete with your program. To start playback of a disc press PLAY. You can cancel a program by
pressing the STOP button twice, removing the disc or turning off the unit. This function does not work unless you turn
PBC on.
Basic and advanced operations