Vidikron 85 - Manual (Page 35)

Installation
Vidikron Vision 85 Owner’s Operating Manual 23
PRE
L
IMINAR
Y
Installing the AutoScope Lens
Motor (Vision 85/CineWide
with AutoScope) Figure 3-6 shows the Vision 85/CineWide with AutoScope motor assembly.
Figure 3-6. Vision 85/CineWide with AutoScope Motor Assembly – Exploded View
Remove Projector Front Feet: Place the projector upside down on a blanket or other soft
surface. Then, remove the two feet at the front of the projector using a Phillips screwdriver.
3
4
Screw, Phillips
Pan-Head,
10-32 x 1/2”
(12x)
1 AutoScope
Lens Motor
2
CineWide with AutoScope
Ceiling Mount Adapter/
Projector Stand, Right
CineWide with
AutoScope
Ceiling Mount
Adapter/
Projector Stand,
Left