Install lens motor, Figure 3-8 . autoscope lens motor installation, Iminar – Vidikron 85 User Manual
Page 37: 8. autoscope lens motor installation, Pre l iminar y
Advertising
Vidikron Vision 85 Owner’s Operating Manual
25
PRE
L
IMINAR
Y
Install Lens Motor: Position the AutoScope Lens Motor (item #1) as shown in Figure 3-8.
Line up the mounting holes on the lens motor housing with those on the underside of the
projector. Secure the motor to the projector with the six remaining 10-32 x 1/2” Pan-Head
Phillips screws (item #2).
Figure 3-8. AutoScope Lens Motor Installation
After you have installed the AutoScope lens motor, proceed with Mounting the Vision 85 on
page 27.
Advertising