Vidikron Vision v120 - Manual (Page 37)

Installation
Vidikron Vision Model 120 Owner’s Operating Manual 25
PRE
L
IMINAR
Y
Installing the AutoScope Lens
Motor (Vision 120/CineWide
with AutoScope) Figure 3-6 shows the Vision 120/CineWide with AutoScope motor assembly.
Figure 3-6. Vision 120/CineWide with AutoScope Motor Assembly - Exploded View
1. Do not install the CineWide lens yet, only the fixed CineWide base plate
or AutoScope lens motor. You will install the CineWide lens after you
install the projector and adjust the primary lens.
2. Some components shipped with your projector may differ slightly from
what is shown in these instructions.
Note
3
4
Screw, Phillips Pan-Head,
M6-1.0 x 12mm (14x)
1 AutoScope
Lens
Motor
2
CineWide with AutoScope
Ceiling Mt. Adapter/
Projector Stand, Right
CineWide with AutoScope
Ceiling Mt. Adapter/
Projector Stand, Left