Vidikron Vision v120 - Manual (Page 40)

Installation
28 Vidikron Vision Model 120 Owner’s Operating Manual
PRE
L
IMINAR
Y
Install Lens Motor: Position the AutoScope Lens Motor (item #1) as shown in Figure 3-8.
Line up the mounting holes on the lens motor housing with those on the underside of the
projector. Secure the motor to the projector with the eight (8) remaining M6 x 12mm
Pan-Head Phillips screws (item #2).
Figure 3-8. AutoScope Lens Motor Installation
After you have installed the AutoScope lens motor, proceed with Mounting the Vision 120
(page 30).