Vivotek FD7141(V) - Manual (Page 36)

VIVOTEK - A Leading Provider of Multimedia Communication Solutions
36 - User's Manual
Network
This section explains how to configure wired network connection for the Network Camera.
Network Type
LAN
Select this option when the Network Camera is deployed in a local area network (LAN) and is intended
to be accessed by local computers� The default setting of Network Type is LAN� Remember to click Save
when you complete the Network setting�
Get IP address automatically: Select this option to obtain an available dynamic IP address assigned by a
DHCP server each time the camera is connected to the LAN�
Use fixed IP address: Select this option to manually assign a static IP address to the Network Camera�
1. You can make use of VIVOTEK installation wizard II on the software CD to easily set up the Network
Camera in LAN� Please refer to Software installation on page 13 for details�
2. Enter the static IP, Subnet mask, Default router, Primary DNS provided by your ISP.
Enable UPnP presentation: Select this option to enable UPnP TM presentation for your Network Camera
so that whenever a Network Camera is presented to the LAN, shortcuts of connected Network Cameras
will be listed in My Network Places. You can click the shortcut to link to the web browser. Currently,
UPnP TM is supported by Windows XP or later. Note that to utilize this feature, please make sure the
UPnP TM component is installed on your computer�