Vivotek FD7141(V) - Manual (Page 96)

VIVOTEK - A Leading Provider of Multimedia Communication Solutions
96 - User's Manual
Krasnoyarsk
320: GMT 08:00 Beijing, Chongging,
Hong Kong, Kuala Lumpur, Singapore,
Taipei
360: GMT 09:00 Osaka, Sapporo, Tokyo,
Seoul, Yakutsk
380: GMT 09:30 Adelaide, Darwin
400: GMT 10:00 Brisbane, Canberra,
Melbourne, Sydney, Guam, Vladivostok
440: GMT 11:00 Magadan, Solomon Is.,
New Caledonia
480: GMT 12:00 Aucklan, Wellington, Fiji,
Kamchatka, Marshall Is.
520: GMT 13:00 Nuku'Alofa
daylight_enable <boolean> 6/6 enable automatic daylight saving to time
zone
daylight_dstactualmode <boolean> 6/7 check if current time is under daylight
saving time.
daylight_auto_begintime string[19] 6/7 display the current daylight saving begin
time.
(product dependent)
daylight_auto_endtime string[19] 6/7 display the current daylight saving end
time.
(product dependent)
updateinterval 0,
3600,
86400,
604800,
2592000
6/6 0 to Disable automatic time adjustment,
otherwise, it means the seconds between
NTP automatic update interval.
restore 0,
<positive integer>
7/6 Restore the system parameters to default
value after <value> seconds.
reset 0,
<positive integer>
7/6 Restart the server after <value> seconds
if <value> is non-negative.
restoreexceptnet <Any value> 7/6 Restore the system parameters to default
value except (ipaddress, subnet, router,
dns1, dns2, pppoe).
This command can cooperate with other
“restoreexceptXYZ” commands. When