Vidikron D-ILA 80 - Manual (Page 11)

11
RS-232C DVI
SVC SYNC
OUT
1. [SYNC OUT] Terminal
This terminal is intended for servicing purposes. Do not use it.
Using it may cause an error or malfunction of the unit.
2. [SERVICE] Terminal
This terminal is intended for servicing purposes. Do not use it.
Using it may cause an error and malfunction of the unit. 3. [RS-232C] Terminal (D-sub 9 Pin)
This is the RS-232C interface-specifi c terminal. This unit can be
controlled by a computer connected externally. (See page 18)
• For details, please check with your authorized dealer.
4. [DVI] Terminal (DVI-D 24 Pin)
This is an input terminal for video signals.
Connect this to the VDP-80 dedicated digital video processor.
(See page 18)
Connector Panel