Vidikron D-ILA 80 - Manual (Page 36)

36
2-3. Parameters used for the data format
The following 3 types of parameters are used for command and response data:
1 Numeric value 2 ON/OFF 3 Special parameters
Each parameter is as follows:
1 Numeric value
A 2-byte hexadecimal value (sign included) is represented by a set of 4-digit (4-byte) characters.
Assignable range: 8000H to 7FFFH
2 ON/OFF
Shows the status (ON or OFF) of the unit, such as POWER and HIDE.
Character Hex Meaning
0 30 OFF
1 31 ON
3 Special Parameters
Parameters for input video-image format
Character Hex Meaning
0 30 60p
1 31 50p
Operation mode parameters
Character Hex Meaning
0000 30h 30h 30h 30h Standby mode
0001 30h 30h 30h 31h Power-on mode
0002 30h 30h 30h 32h Cool down mode
0004 30h 30h 30h 34h Emergency mode
3. External control command table
Function Command
Asking Data Type
Power On ELSE Numeric Value ON / OFF Special Data
Operate U0F X X X O X
MUTE U00 O X X O X
Left/Right Reversal U17 O X X O X
Top/Bottom Inversion U18 O X X O X
Operation Mode Z03 O O X X O
Operation mode: Only Asking command is possible
Terminal Description (continued)