Vidikron D-ILA 80 - Manual (Page 20)

20
Connecting the Power Cord (supplied)
After all devices have been connected, connect the supplied power cord.
1 Connect the supplied power cord to the power input
terminal of this unit
2 Insert the main plug of the supplied power cord into the
wall outlet
1.
Connect the supplied power cord to the power input terminal of the projector.
2.
Insert the main plug of the supplied power cord into the wall outlet.
Cautions Against Fire and Electric Shock
• Since the power requirement of the projector is high, please insert the power plug directly into a wall outlet.
• When not using devices, remove the power plug from the wall outlets.
• Do not use power cords other than those supplied.
• Do not use a power voltage different from that which is indicated.
• Do not cut, tear or modify the power cords. Also, do not put a heavy object on, heat, or stretch the power cords,
otherwise they may be damaged.
• Do not insert or pull out the plugs with a wet hand.
(e.g.)
• Since the power requirement of this unit is high, insert the power plug directly into a wall outlet.
• When not using devices, remove the power plug from the wall outlet.
• Do not use power cords for connection other than those supplied.
• Do not use a power voltage diff erent from that which is indicated.
• Do not cut, tear or modify the power cords. Also, do not place a heavy object on, heat or stretch the power cords as this may cause
damage to the cords.
• Do not insert or pull out plugs with a wet hand.
Cautions Against Fire and Electric Shock
Connecting to Various Devices (continued)