VIEWSONIC EXES-2000 - Manual (Page 20)

6-11 Connection of power source
Connect CN1 on the CC unit and CN3 on the FC-210 printed circuit board to AC output of the PU-200
or to the external power supply. Also, connect CN5 on the CC unit to CN4 on the FC-210 printed circuit
board with the attached connection cable.
Note
Select the desired voltage by means of
the voltage selector. The voltage selec-
tor is pre-set to 120V or 240V when
supplied from the factory.
(FC-210)
Voltage selector
(PU-200)
– 19 –