Performance test – VIEWSONIC EXES-2000 User Manual

Page 39

Advertising
background image

8. Performance Test

After finishing station No.24 programming, perform operation tests from each station. Write down
the test results in "Initial Checking Sheet".

8-1 Speech and Function Tests

1. Speech Test
* Under the normal condition, make conversation using the

stations connected to the exchange and check the sound
volume and sound quality.

* According to the operation environment (surrounding noise,

echo, installed location, etc.), the microphone sensitivity or
speaker volume needs to be adjusted for hands-free con-
versation.

* When the paging function is employed, adjust the gain of the

paging amplifier or change the installed location of the

speakers and stations to eliminate feed-back.

< Method of Speech test>

(1) Hands-free conversation

1. Call the other station.

2. Start conversation about 50 cm away from each station to

check the sound quality and its volume.

3. Confirm that the automatic voice switching allows for smooth

conversation.

4. When the other station is in a very noisy area, the voice

switches are liable to fail to work properly, causing the voice
from the station in a quiet area to be interrupted. In this case,
adjust microphone sensitivity and speaker sound volume
according to the operating instructions contained in a

package of each station.

(2) Conversation between a handset station and a handsfree

station

1. Call the other station.
2. Start conversation and check the sound quality and sound

volume and also confirm that simultaneous conversation is

possible.

3. When feed-back occurs, adjust the microphone sensitivity or

speaker volume of the hands-free station.

(3) Handset conversation

1. Call the other station.

2. Start conversation and check the sound quality and sound

volume and also confirm that simultaneous conversation is

possible.

2. Function Test
Confirm that each function works properly by performing tests
according to operation manual.

Noisy area

Station A

Voice from station B is in-

terrupted.

Press

key to talk

and release it to listen.

Quiet area

Station B

Surrounding noise at

station A has dominance.
(Voice from station B is
almost impossible.)

Speak loudly or
Press

key to talk.

– 38 –

Advertising