VIEWSONIC EXES-2000 - Manual (Page 36)

14. REGISTRATION OF STATIONS TO REFUSE ZONE 2 PAGING
NOTES
1. All the stations are registered for this function when initial set-up is made.
2. To cancel at one time the data programmed to all the stations for this
function,
Dial
10 times
3. To register all the stations for this function,
Dial
10 times
Depress the
4. To register stations having consecutive station numbers for this function,
5. Re-start at Step 1 when mis-dialing occurs. (All other registrations remain
valid.)
(Confirmation tone
will be heard.)
(Confirmation tone
will be heard.)
key steadily.
REGISTRATION OF STATIONS TO
REFUSE ZONE 2 PAGING
Step 1 Dial
Function code
New registration?
Yes. No.
Registration
Step 2
(allowed station No.)
Dial
plus
Confirmation
tone
Repeat twice.
Step 2
(allowed station No.)
Dial
plus
Confirmation
tone
Repeat twice.
Registration finished?
No.
Yes.
Registration of next allowed station.
Other registration mode
or registration finished.
Dial
First station No. Last station No.
Repeat twice.
– 35 –