Cable #2 – Vision Fitness ST250 User Manual
Page 12
Advertising
12
5
STEP
• If you already have the base unit
assembled with cable #2 and are
adding the leg press to it, follow this
instruction, otherwise proceed to Step 6:
Unscrew the nuts and bolt that attaches
cable #2 to the rear termination tube
(6b of base unit), using a 19mm wrench.
Unscrew the nuts from the slotted bolt. Pull
the cable out through the front at
pulley F of the base unit.
CABLE #2
F
Cable #2
6b
Advertising