VTech I5808 - Manual (Page 11)

3.Hold down [PAGE] key for 5 seconds. When the LINE IN USE light begins to flash,
release the [PAGE] key.
4.The HANDSET CHARGING light will blink 5 times. Within 5 seconds from when it
stops blinking, press [PAGE] once.
VT2461 Mk1 DEREGISTER A SINGLE HANDSET
1.Unplug power from the Base. Remove spare battery pack.
2.Hold down [PAGE] while reconnecting power. When the POWER light begins to
blink, release the [PAGE] key.
3.Press [PAGE] 1 to 4 times, corresponding to the Handset you wish to deregister.
4.Once you complete step #3, the HANDSET CHARGING light will blink back to you
the number of times corresponding to the Handset you wish to deregister. Within 5
seconds from when it stops blinking, press [PAGE] once.
VT2461 Mk2a
1.Unplug power from the Base. Remove spare battery pack.
2.Hold down [PAGE] while reconnecting power. When the Base Display says 'Pr',
release [PAGE].
3.Press [MENU]. The Display will say 'rh'.
4.Press [SELECT] to choose h1, h2, h3, h4 or AL (all).
5.Press [TIME/SET] to confirm.
Unplug power from the Base, then reconnect power to complete deregistration.
2455 De-register
DEREGISTER ALL HANDSETS
1.Unplug power from the Base. Remove spare battery pack.
2.Hold down [PAGE] while reconnecting power. When the POWER light begins to
blink, release the [PAGE] key.
3.Hold down [PAGE] for 5 seconds. When the LINE IN USE light begins to flash,
release the [PAGE] key.
4.The HANDSET CHARGING light will blink 5 times. Within 5 seconds from when it
stops blinking, press [PAGE] once.
DEREGISTER A SINGLE HANDSET
1.Unplug power from the Base. Remove spare battery pack.
2.Hold down [PAGE] while reconnecting power. When the POWER light begins to
blink, release the [PAGE] key.
3.Press [PAGE] 1 to 4 times, corresponding to the Handset you wish to deregister.
4.Once you complete step #3, the HANDSET CHARGING light will blink back to you
the number of times corresponding to the Handset you wish to deregister. Within 5
seconds from when it stops blinking, press [PAGE] once.
8 inch 4 conductor line cord
Perform the following:
-Advise the customer that we will send him a replacement 8 inch 4 conductor line cord.
-Inform the customer that he or she will receive the new replacement cord in U.S. Mail.
-Verify and update the customer's profile with all address and telephone information.
-Place an internal referral request via CRSS to Research Advisor to place an order for the
replacement line cord.
Perform the following: