Telezapper, Twisted pair cords, Dual-band frequency – VTech I5808 User Manual

Page 8: Language conversion

Advertising
background image

·Enter the 15 digit Base ID Code, located on the underside of the Base Unit. The ID Code
can include numbers (0-9) and characters (*,#).
·Press OK. The Handset will display: PLEASE WAIT!
·Wait approximately 15 seconds. The Handset will display FOUND BASE.
NOTE: Occasionally, it will take longer than 15 seconds for the Handset to find the Base
Unit. This is normal.
If the Handset displays: BASE BUSY TRY LATER, this indicates that the system is in
use. Wait until the Base Unit is in the idle (on hook) mode, and repeat steps 2 to 4.

Explanation of Why the TeleZapper Should Be Set On
'BASIC' to avoid interference with an Answering System

Once the Answering System picks up the line, the TeleZapper also seizes the line and
generates the tones which 'zap' telemarketers. When the TeleZapper is in 'advanced'
mode, the tones can stay on the line long enough that the Answering System may think
that an extension phone has been picked up (depending on the Answering System). If this
happens, the Answering System's Call Intercept/Interrupt feature will stop the recording
of the message, and since no extension has actually been picked up, the call will be
disconnected.

Twisted Pair Cords

Twisted pair cords are a type of phone cord wires used to reduce interference/crosstalk
between lines. Twisted pair cords consist of two insulated copper wires which are twisted
around each other to reduce interference from one wire to the other. The twisting of the
wire pairs is what reduces the interference.

Dual-Band Frequency

Our unit does utilize both the 5.8 and 2.4 GHz frequency bands simultaneously. The
dual-band technology provides a clear advantage over existing cordless phones in its
ability to avoid interference and provide optimal clarity in both received and transmitted
audio.
Since transmitting in the 5.8 GHz frequency requires more power, the Base station
transmits with the 5.8 GHz band (since it remains plugged to a power outlet all the time),
while the battery-operated Handset transmits in the 2.4 GHz band, so it can yield
optimum talk-time performance between battery charges.

Language Conversion

VT5831 LANGUAGE CONVERSION OF HANDSET MENUS
ENGLISH
SPANISH
FRENCH
CALLS LOG
GUIA DE LLAMADAS
REGISTRE D'APPEL
INTERCOM
INTERCOMUNICADOR
INTERPHONE
HANDSET SETTINGS
CONFIG AURICULAR
REGLAGES COMBINE

Advertising