Visioneer 9520 - Manual (Page 115)

108 V ISIONEER O NE T OUCH 9520 P HOTO S CANNER U SER ’ S G UIDE
5. Select the scan configuration Configure Before Scan.
6. Right-click on Configure Before Scan and choose an interface to
use for configuring before scanning.
TWAIN—The Basic Interface or Advanced Interface opens for you
to configure the scanning. See “Scanning from the Basic Interface”
on page 46 or “Scanning from the Advanced Interface” on page 50.
WIA—The Windows Image Acquisition (WIA) interface opens for
you to configure the scanning. The WIA option is only available if
your computer is running Microsoft Windows XP or Windows
Vista. See “Scanning with the Windows Image Acquisition” on
page 132.
7. Click OK or Apply on the OneTouch Properties window.
Select the button.
Select Configure
Before Scan.
Right-click on
Configure Before
Scan to get the
menu, and choose
the interface to use
for scanning.