Visioneer 9520 - Manual (Page 13)

6 V ISIONEER O NE T OUCH 9520 P HOTO S CANNER U SER ’ S G UIDE
S
TEP
1: A
SSEMBLE THE
S
CANNER
To assemble the scanner:
1. Remove any shipping tape from the top and bottom of the scanner.
2. Plug the Transparency Adapter Cable into the Option port on the
body of the scanner.
The Transparency Adapter Cable must be securely attached for your
scanner to be able to scan 35mm slide and negative transparencies.
3. Open the lid and remove the protective film from the Transparency
Adapter. Discard the protective film
Transparency Adapter Cable