Visioneer 9520 - Manual (Page 22)

S TEP 3: C ONNECT THE S CANNER 15
4. Plug the power adaptor into the scanner power port, then into a
wall outlet.
The status light on the front of the scanner is illuminated,
indicating the scanner is receiving power.
Note: Your scanner does not have a power switch. Plugging it in turns
on the power.
Note: Only use the power adaptor (Model No. PA-08J made by YHI,
Ltd.) included with your scanner. Connecting any other type of power
supply may damage your scanner, and will void its warranty.
Status light