Vox VT80+ - Manual (Page 13)

13
Channel Select mode (recalling user programs)
In Channel Select mode you can use the BANK switch and CHANNEL
switches to recall the programs that are saved in each channel of the bank; all
of the amp and effect parameters will switch automatically.
Switching to Channel Select mode
If the BANK and CHANNEL LEDs are dark, you’re not in Channel Select
mode. Press the BANK switch or a CHANNEL switch; the BANK and CHAN-
NEL LEDs will light up, and you’ll be in Channel Select mode.
Switching channels
Press a CHANNEL switch to change channels. The program specified for that
channel will be selected, regardless of the position of the top panel selectors
and control knobs. If you press the BANK switch, the bank will change, and
the channel of the same number that had been selected in the previous bank
will be selected.
HINT: If you connect the optional foot switch (VOX VFX5) to the rear
panel, you’ll be able to switch banks/channels using your foot. For
details, refer to “Using the foot switch (VOX VFS5)” (p. 19).