No sound from the phones jack, Effects are not applied – Vox VT80+ User Manual

Page 33

Advertising
background image

33

4. No sound from the PHONES jack

• Could the top panel MASTER volume be turned down?
• Check whether sound is output from the amp.

To do this you must disconnect the PHONES jack, since sound will not be
output from the internal speaker if headphones or a cable are connected to the
PHONES jack.
If no sound is produced from the amp, check the items listed in “No sound
from the amp,” above.
If there is sound from the amp, check whether your headphones or cable
might be broken or malfunctioning.

5. Effects are not applied

• Could the TUNER (BYPASS) LEDs be lit?

If it is lit, the effect is bypassed. Press the TUNER (BYPASS) switch to defeat
bypass. The TUNER (BYPASS) LEDs will go dark.

• Could the VALUE, DEPTH, or REVERB knob be set to OFF or the minimum

value?
Adjust the knobs.

• Could the effect be turned off via foot switch (VOX VFS5) operation?

Press one of the VFS5’s CH switches, or rotate the top panel VALUE, DEPTH,
or REVERB knob to turn the effect on.

6. No sound is heard from a device connected to

the AUX IN jack

• Is the device connected correctly?
• Could the volume of the device be set to minimum?

Advertising
This manual is related to the following products: