VIEWSONIC Wireless Media Gateway WMG80 - Manual (Page 18)

ViewSonic Wireless Media Gateway 12
Step 2: Set your PC to DHCP
Verify that your computer is set to DHCP (Dynamic Host
Configuration Protocol) to obtain an IP address automatically as
follows: (may be already set to DHCP by default.)
For Windows 2000 or XP
(1) Click the Windows ® Start button > Control Panel > Network
and Internet Connections > Local Area Connection. The
Local Area Connection Status screen appears as shown on
the right.
(2) From the General tab (usually appears selected by default),
click Properties. The Local Area Connection Properties
screen appears in the next step.