VIEWSONIC Wireless Media Gateway WMG80 - Manual (Page 37)

ViewSonic Wireless Media Gateway 31
Remote Administration
By default, only users on the intra-net can browse the built-in Web
pages to perform administration tasks. The Remote Administration
feature enables you to perform administrative tasks from a remote
host.
This section shows how to set up the privilege of remote
management through Web. Administrator can allow login and/or
ping service through WAN side. You can also manage the device
anywhere.
Routing
In this section, you can view and change the Routing Table of
WMG. All the updated routing table and RIP Records are listed in
this menu.
Static routing allows all packets are forwarded via a fixed path. To
add a static route, click AddRoute:
1 Indicate the routing interface.
2 Fill in the destination IP address and its subnet mask.
3 Fill in the gateway IP address, mostly will be the router IP.
4 To Save or Cancel Changes, Click Submit when you finish
changing the settings. Click Cancel to return to the previous
unsaved settings.