VIEWSONIC Wireless Media Gateway WMG80 - Manual (Page 24)

ViewSonic Wireless Media Gateway 18
Security Mode: WEP
Wired Equivalent Protection.
Security Mode: select WEP Encryption
WEP Encryption: click the down arrow for more options: select
64bits/10 hex digits or 128 bits/26 hex digits.
Default Transmit Key: Select Key 1 from the pull down menu.
If you selected the 64bit option, enter 10 hex in Key 1 field.
IMPORTANT! For 64bits, enter 10 hex . . . can be
0123456789abcdef in Key 1, 2, 3, or 4 fields. Be sure to write
down that key for later configuration on the client side.
For 128bits/26 hex: For 64bits, enter 26 hex . . . can be
0123456789abcdef in Key 1, 2, 3, or 4 fields. Be sure to write
down that key for later configuration on the client side.
You’re done with the basic setup! Go to Step 4: Set up your
network.
For more information, see the Troubleshooting section in this user
guide. If you still need help, contact ViewSonic Customer
Support. See the Customer Support table in the Appendix of this
guide for contact information.