VIEWSONIC Wireless Media Gateway WMG80 User Manual
Page 57
ViewSonic Wireless Media Gateway
51
Firmware Upgrade
Firmware Upgrade improves the performance of your WMG
(Wireless Media Gateway).
To download newer software
1
Periodically check the ViewSonic support site
www.viewsonic.com/support for updates to software and
then download to your local PC hard drive.
2
Login to the WMG web-based utility: http://192.168.1.1
3
Select the Advanced Setup tab. From the Utilities menu
shown on the right, click Firmware Upgrade.
4
On the next screen, click Browse. Go to the folder where you
downloaded in step 1 the latest firmware file from the
ViewSonic support site.
5
A typical file extension for firmware upgrades is .azt. Highlight
the .azt file > click Open > click Upload > wait about 10 minutes
for the file to upload.
6
A message appears asking you to reboot > click Yes to reboot.