Vivitar Vivicam 2755 - Manual (Page 13)

18
Compensation - allows you to set the Exposure Value(EV)
compensation manually from -1. 8 to +1. 8 in 0. 3 steps. Use Self/ +
button to add the value , or Flash/- button to subtract to value , then
press Menu button to set the value .
W.Balance - different light sources produce light of different colors.
White balance allows you to obtain the highest color fidelity possible
by taking into account the lighting conditions in which the camera is
operating. Five white balance modes are available:
AUTO - automatically chooses the best white balance for given lighting
conditions.
DAY LIGHT - designed for sunny day photos taking.
SHADY - designed for photos taking under shadow.
LAMP - designed for indoor lamp lighting.
FLUORESCENT - designed for indoor Fluorescent lighting.
Select the desired White Balance option by pressing the Menu button
until it appears ,and then hit the Self/+ button to set the value.
Note :The camera resets to Auto ( White Balance) if the power is
switched off.
Auto Play - defines the interval between images when viewing them
on the LCD screen automatically. Press the Menu button to increase
the Auto Play interval. Selecting the Self/+ button to start slide show
or the Flash/- button to return to the main menu.
Transfer - copies images in camera memory to Compact Flash
memory card. After the command is executed the camera will display
one of the following messages:
TOTALLY MOVED - all images files have been successfully moved to
the Compact Flash memory card .
PARTIALLY MOVED - only some of the images have been moved to the
Compact Flash memory card. This message will appear if there is not
sufficient free space on the card for all the images in the camera’s
memory.
NONE MOVED - none of the image files have been transferred to the
Compact Flash memory card. This message will appear if there is no free
space on the card, if there is no card installed, or if there is a card error.
■
■
■
■