Vivitar Vivicam 2755 - Manual (Page 15)

20
Erasing Pictures from Memory
The Erase button allows you to remove any unwanted pictures from the
memory.
1 After turning the camera on, press the Record/Play button to enter the
PLAY mode.
2 To remove a picture, scroll to the picture then press the Erase button .
A dialog asking you to confirm the deletion appears on the LCD. Press
the Self/+ button for Yes , the Menu button for Quit, and the Flash/- buttom
for ALL . After erasing a picture, exit to the Play mode by pressing the
Menu button again.
Defining Picture Quality
Your digital camera can take pictures at two different modes: Normal(compressed)
and Fine(less compressed). Both modes take pictures at 640 x 480 monitor resolution.
Note, however, that your camera can only store 32 images in Normal mode or 16
images in Fine mode with 2MB built-in flash memory.
To define your picture quality:
1 Click the Menu button to display the MAIN MENU options on the LCD
display.
2 Using the Self/+ or the Flash/- buttons, cycle through the options until
you have selected the Quality option.
3 Press the Menu button into the Quality sub menu , use the Menu button
to change quality setting .Then use the Self/+ button to set , or the Flash/
- button to quit without change.