Vivitar Vivicam 2755 - Manual (Page 7)

12
Using the camera
Power Supply
This camera features a two-way power supply that lets you use either
batteries (AA-size Alkaline) or a household AC current.
Inserting Batteries
1 Place your thumb on the battery door.
2 Slide the battery door away from the
camera.
3 Insert the batteries as indicated on the
inner side of the battery door.
Botton view of the camera
Notes:
If you are not going to be using the camera for an extended length of
time, then you should remove the batteries to prevent leaks or corrosion.
Never use manganese batteries.
Never mix old and new batteries.
Low temperature (under 0 c) may reduce the output efficiency of
batteries , thereby shortening the operation time of camera.
The recommend battery is PANASONIC ALKALINE, DURACELL ULTRA
or rechargable battery.
■
■
■
■
■