Vivitar Vivicam 2755 - Manual (Page 17)

Installing capture driver and software
Once you have your camera connected to your computer, the next step is to trans-
fer the pictures contained in the camera memory to your computer’s hard disk. Be-
fore you start download the pictures, you need to install first the appropriate hard-
ware capture drivers (TWAIN drivers) and image editing software.
Installing the TWAIN Driver
The TWAIN driver is compatible to Windows TWAIN protocol. With this driver in-
stalled your computer may record and recognize your camera device. Follow the
steps below to install the TWAIN driver into your system.
Please insert Camera Driver Disk into your floppy disk then run “Setup.exe”. Follow
instructions to complete the installation. You may now either restart Windows or go
to install PhotoSuite SE directly. Drivers will be valid only after system reboot.
22
Installing MGI PhotoSuite SE
MGI PhotoSuite is world-known ease-of-use image editing software. Use PhotoSuite
you may download and save pictures from your camera to your computer. PhotoSuite
software is implemented with auto-setup program. Once you insert PhotoSuite CD
disk into CD drive, the installation will start automatically.
Otherwise, you still can run “setup.exe” file in the root directory of CD drive. Select
the language version then follow instructions to complete the program installation.