Delete all messages, Record, play or delete memos, Answering system operation – VTech CS6124-2 User Manual

Page 32

Advertising
background image

28

Answering system operation

Delete all messages

To delete all messages with the telephone base:

Press

X/DELETE when the phone is not in use.

The telephone announces,

“To delete all old messages, press

DELETE again.”

Press

X/DELETE again. All previously heard messages are erased and the

telephone announces, “

All old messages deleted.”

To delete all messages with a handset:

Press

MENU/

SELECT

when the handset is not in use.

Press

CID or

to select

Answering sys, then press

MENU

/SELECT.

Press

CID or

to select

Delete all old, then press

MENU

/SELECT. The

handset shows

Delete all msg?

Press

MENU

/SELECT

to confirm your selection. The screen displays

Deleting . . .

and then

No old messages. You hear a confirmation tone.

Record, play or delete memos

Memos are your own recorded messages used as reminders for yourself or others

using the same answering system. You can record your own memos using a system

handset. Playback and delete them in the same way as incoming messages.
To record a memo:

Press

MENU/

SELECT

when the handset is not in use.

Press

CID or

to select

Answering sys, then press

MENU

/SELECT.

Press

CID or

to select

Record memo, then press

MENU

/SELECT.

The screen displays

Record in 5 sec (it counts down to one second) and the

handset announces,

“Record after the tone. Press

5 when you are done.”

After

the tone, speak towards the microphone of the handset.
Press

5

when finished recording. The handset announces,

“Recorded.”

1.
2.

1.
2.
3.

4.

1.
2.
3.
4.

5.

If you record a memo when the answering system memory is full,

“Memory is full”

will be announced.
Each memo can be up to three minutes in length and memos shorter than two

second are not recorded.
When the answering system has less than three minutes of recording time left,

“Less than three minutes to record” is announced at the telephone base.
When

F and number of messages are flashing alternately in the message window

and the handset displays

Rec mem full, the memory is full. Delete some messages

to make room for more.

You can only delete old messages, which are messages you have played.

Advertising
This manual is related to the following products: