Wacom Cintiq DTZ-1200W - Manual (Page 10)

Your new Cintiq
Page 8
CINTIQ PEN DISPLAY COMPONENTS
Your product has many features and components with which you will want to become familiar.
FRONT VIEW
The display and tablet sensor function as an integrated output and input device. The display supports
resolutions up to 1280 x 800 pixels at 16,777,216 colors. The tablet sensor reports pen coordinates,
pressure, tilt, switch, eraser, and other information.
Power LED
Lights blue when power has been
supplied to Cintiq and a video
signal is present.
Glows orange when no video signal
is detected by Cintiq. (e.g., Your
computer is turned off, starting up,
or has entered a power
management mode in which video
signals are not sent.)
Status LED
Lights blue when the pen is in the active area of the pen display tablet and the
pen tip, eraser, or side switch are pressed. The USB cable must be plugged into
an active USB port and a video signal must be present before the LED will light.
Integrated display and tablet
ExpressKeys
All ExpressKeys can be
customized to simulate
modifier keys, keystrokes,
and other frequently used
functions. A display toggle
function is also available,
enabling you to toggle the
screen cursor between the
Cintiq pen display and your
other displays. See page 21.
Touch Strip
Slide your finger over the
Touch Strips to zoom, scroll,
or perform custom keystroke
actions. See Tablet controls
on page 21.
12WX_Manual.fm Page 8 Thursday, September 20, 2007 3:49 PM