Wacom Cintiq DTZ-1200W - Manual (Page 58)

Appendix
Page 56
PRODUCT SPECIFICATIONS
CINTIQ 12WX (MODEL DTZ-1200W) GENERAL SPECIFICATIONS
DISPLAY
Dimensions (W x D x H) 405 x 270 x 17 mm (15.96 x 10.64 x 0.67 in), excluding rotation pivot
Weight 2.0 kg (4.4 lb)
Input voltage 12 VDC
Power consumption 29W or less in normal operation mode
2 W or less in suspend or standby modes
1 W or less in off mode
Operating temperature and humidity 5° to 35° C, 20 to 80% RH (non-condensing)
Storage temperature and humidity -10° to 60° C, 20 to 90% RH (non-condensing)
(maximum storage humidity is 38% at a temperature of 60° C, and
maximum storage temperature is 42° C at a humidity of 90%)
Certification and compliance FCC Part 15 Class B & Subpart C, CE, VCCI Class B, EDID 1.3, C-tick,
MIC, BSMI, CCC, RoHS, GOST-R, Industry Canada, Class B
Display a-Si TFT active matrix LCD
Screen size 310 mm (12.1 in) diagonal, 261.1 x 163.2 mm (10.3 x 6.4 in)
Aspect ratio 16 : 10, approximately
Supported resolutions 1280 x 800 pixels (WXGA) maximum, 1024 x 768 pixels (XGA),
800 x 600 pixels (SVGA), 640 x 480 pixels (VGA), and others
Synchronization range 60 Hz vertical (for WXGA)
50 to 75 Hz vertical, 30 to 82 kHz horizontal
(for resolutions less than WXGA)
Pixel pitch 0.204 x 0.204 mm (0.01 x 0.01 in)
Color depth 16,777,216 colors (8 bits per color)
Pixels 1,024,000
Response time (refresh rate) 25 ms typical (rise and fall)
Brightness
180 cd/m
2
(maximum)
Contrast ratio 600:1
Plug and Play DDC-2B, DDC/CI, and other DVI standards
LCD quality Each Cintiq LCD panel is produced under stringent quality standards.
Production techniques cannot guarantee an absolutely perfect TFT
display. Wacom does not allow any pixel to be always white or always
black. A small number of sub-pixels (7 or less) can be partially on or
partially off – this does not mean the display is defective.
12WX_Manual.fm Page 56 Thursday, September 20, 2007 3:49 PM