Wacom Cintiq DTZ-1200W - Manual (Page 12)

Your new Cintiq
Page 10
CONVERTER UNIT
The converter unit provides an interface for all video and data signals passing between the Cintiq
pen display and your computer. The unit also routes input power from the supply adapter to your pen
display.
On Screen Display (OSD) controls
Use these controls to adjust the display settings.
See Adjusting the display on page 30.
DVI/VGA (digital/analog) switch
Set this switch for the video connection you will be using.
For DVI, move switch left (toward the connector).
For VGA, move switch right.
Pen display tablet cable connector
Connects to the pen display’s integrated cable.
DVI-I video connector
Accepts an incoming DVI or VGA
video signal from your computer.
USB-A connector
For USB connection to your computer.
Power plug
For power input connection to the power supply adapter.
12WX_Manual.fm Page 10 Thursday, September 20, 2007 3:49 PM