Wacom Cintiq DTZ-1200W - Manual (Page 11)

Your new Cintiq
Page 9
REAR VIEW
Display stand
Enables you to you to adjust the incline of
the working surface. See Adjusting display
incline on page 25.
The unit can also be fixed to a VESA 75
standard mounting fixture. See page 52.
Integrated cable
Connects to the converter unit.
Carries all data, video, and power
signals to and from the pen display.
Rotation pivot
Allows rotating the Cintiq.
See page 26.
Important: Always store the pen display on a stable surface or in its original packing
carton when not in use. Do not bend or crimp the cable.
Kensington security slot
Allows easy attachment of a security
cable. (Located on upper edge of unit.)
Pen tether attachment point
If using a pen tether, connect it
to the attachment point located
on either side of the unit.
Stand latch
Slide to the side to unlock the display
stand from the closed position.
Power switch
Turns power on or off.
(Located on upper edge
of unit.)
12WX_Manual.fm Page 9 Thursday, September 20, 2007 3:49 PM