Adjusting the display, Factory presets, auto-sync, and color calibration, Power saving – Wacom Cintiq DTZ-1200W User Manual

Page 32

Advertising
background image

Customizing
Page 30

ADJUSTING THE DISPLAY

FACTORY PRESETS, AUTO-SYNC, AND COLOR CALIBRATION

Factory presets: For optimal display quality, set your video card to Cintiq’s native resolution of
1280 x 800 pixels (WXGA). See page 56 for signal specifications.

Auto-sync: The auto-sync function automatically sets the horizontal and vertical screen position, as
well as clock and phase. When connected as a VGA display, Cintiq attempts to automatically
synchronize to the incoming signal. At the native resolution of 1280 x 800, the vertical refresh
frequency must be set to 60 Hz. For other resolutions, auto-sync will function when the horizontal
frequency is between 30 to 82 kHz and the vertical frequency is between 50 to 75 Hz. If a specific
resolution and vertical refresh frequency are not supported, you will see an “invalid mode” message.
In this case choose a different resolution or refresh frequency.

If Cintiq does not automatically synchronize with the incoming signal in VGA mode, open the OSD
menu, select the VGA I

MAGE

menu option, and choose A

UTO

A

DJUST

to initiate display synchronization.

Additional screen display adjustments can be made using the OSD controls.

Color calibration: Changing the color, color temperature, contrast, brightness, or backlight from their
default settings will invalidate the ICC color profile that was included on the driver CD.

POWER SAVING

Cintiq conforms to VESA and ENERGY STAR

®

power saving guidelines.

When using Cintiq with a Display Power Management Signaling (DPMS) compliant computer or video
card, the display will automatically comply with the below power saving parameters. When these
power-saving functions are in effect, the screen display is darker than usual.

* Depending on the specifications and settings of your computer and video card, the power light may only change

to orange when in standby and suspend modes.

Computer mode

H-sync

V-sync

Video

Power consumption

Power lamp

Power ON

Yes

Yes

Active

50 W

Blue

Standby mode

No

Yes

Blanked

2 W

Orange/blue*

Suspend mode

Yes

No

Blanked

2 W

Orange/blue*

OFF Mode

No

No

Blanked

1 W

Orange

12WX_Manual.fm Page 30 Thursday, September 20, 2007 3:49 PM

Advertising