White Rodgers 1F95-71 - Manual (Page 14)

14
• ADJUSTABLE HEATING AND COOLING
CYCLE TIMES (ANTICIPATION) — If the
heating/cooling system is turning on and off
too often (short cycles) or not often enough
(long cycles), you may want to adjust the
anticipation setting.
A cooling anticipation setting of less
than 10 may cause decreased com-
pressor life.
To adjust anticipation, press SET
CLOCK
and ADV
DAY
at the same time. The display will show
HEAT 8 (this is the factory preprogrammed
heating anticipation setting). You may se-
lect any anticipation setting from 4 to 40. If
the heat cycles are too short, press TIME
FWD to
increase the cycle time. If the heat cycles
are too long, press TIME
BACK
to decrease the
cycle time. To set cooling anticipation, press
SET
CLOCK
and ADV
DAY at the same time again. The
display will show COOL 14 (factory prepro-
grammed cooling anticipation). Use TIME
FWD
and TIME
BACK
to adjust anticipation. Press RUN
PRGM
to return to your program.
• LOW BATTERY INDICATOR — The word
BATTERY will flash on the display if the 9
volt alkaline battery is low and should be
replaced.
CAUTION !