White Rodgers 1F95-71 - Manual (Page 20)

20
Heating Program for ALL days of the Week:
FACTORY PREPROGRAMMING
Cooling Program for ALL Days of the Week:
PERIOD TIME TEMP PERIOD TIME TEMP
1
2
3
4 5:00 AM
8:00 AM
5:00 PM
10:00 PM
64
70
64
64 1
2
3
4 5:00 AM
8:00 AM
5:00 PM
10:00 PM
82
78
82
82
If you want to change the preprogrammed
times and temperatures, follow these steps.
1. Determine the heating and cooling tem-
peratures you want to use. You may select
up to two heating temperatures (HEAT A
and HEAT B), and up to two cooling tem-
peratures (COOL A and COOL B). Use the
following table to write down the tempera-
tures you have selected. Keep in mind that
you can program up to 4 temperatures (2
heating, 2 cooling) at a time.
To operate properly in the AUTO mode, there
must be a minimum 1
°
F separation between
the highest heat temperature and the lowest
cool temperature (see diagram below).
NOTE
79
78
77
76
75
74
COOLING TEMPERATURES
HEATING TEMPERATURES
DEAD BAND 1 ° F