Weider LCD VW46L - Manual (Page 45)

VIZIO
®
VW46L FHDTV20A User Manual
Version 10/20/2008 45
www.VIZIO.com
4.4 DTV / TV Tuner Setup
When you first used your VW46L FHDTV20A you will have setup your TV for DTV / TV channels using
the Initial Setup screens. If you did not do this or if your setup has changed, you can do this from the TV
TUNER SETUP menu.
Once the adjustments are completed press the LAST button repeatedly to exit the OSD completely.
4.4.1 Tuner Mode
When the MENU button is pressed, the On
Screen Display (OSD) appears on the PICTURE
adjustment page.
Press the button to display the TV page.
Press the button to highlight the Tuner Mode
selection.
Press the button to choose Cable or Air
(Antenna) depending upon which equipment you
have attached to the DTV / TV Input.
Once the adjustments are completed press the
LAST button repeatedly to exit the OSD
completely.
4.4.2 Auto Search
Press the button to highlight the Auto Search
selection.
Press the button to Auto Search for TV
channels available. The TV will automatically
search for analog and digital channels.
Once the adjustments are completed press the
LAST button repeatedly to exit the OSD
completely.
4.4.3 Skip Channel
After the TV has stored all of the available DTV
channels in memory you will find that some
channels will be too weak to watch comfortably or
they may be channels you do not want to see.
Select the channel you wish to remove, press the
MENU key .
Press the buttons to open the TV TUNER
SETUP menu.
Press the button to highlight SKIP CHANNEL.
Press the button to select this channel to be
skipped when using the CH+ or CH- button. You
will still be able to select this channel using the
number buttons on the remote control.
Once the adjustments are completed press the LAST button repeatedly to exit the OSD completely.