Weider LCD VW46L - Manual (Page 5)

VIZIO
®
VW46L FHDTV20A User Manual
Version 10/20/2008 5
www.VIZIO.com
Additional Certified Accessories for the VIZIO
VW46L FHDTV20A are sold separately
Wall Mounts
High Definition Cables
Extra or replacement Remote
VIZIO also offers Installation Services and Extended Warranty Services for your VIZIO VW46L
FHDTV20A
To purchase or inquire about additional accessories and services for your VIZIO product, visit our web
site at
www.VIZIO.com or call us toll free at 888-VIZIOCE (888-849-4623)
Installation Preparation
Please read this user manual carefully before installing your VIZIO HDTV.
The power consumption of the TV is about 130W (Avg), please use the power cord designated for TV.
When an extension cord is required, use one with the correct power rating. The cord must be grounded
and the grounding feature must not be defeated.
The TV should be installed on a flat surface to avoid tipping. For proper ventilation, you must allow space
between the back of the TV and the wall. If you would like to mount your TV on the wall, please see
below ‘Preparing Your LCD HDTV for Wall Mounting’ for additional information. Avoid installing the TV in
places with high humidity, dust or smoke so as not to shorten the service life of the electronic components.
Install the TV in landscape orientation; any 90˚ clockwise or counter-clockwise installation may induce
poor ventilation and excessive component damage.
VIZIO offers professional installation services. Please contact VIZIO for more information on these
services at 888-VIZIOCE (888-849-4623) or
www.VIZIO.com .
Attaching the Safety Strap
For when the VW46L FHDTV20A is not mounted on the wall with a Wall Mount, a Safety Strap has been
included to attach the HDTV to the wall to reduce the chance of the HDTV being pulled over. The Safety
Strap should be used with common sense practice such as ensuring that children (or adults) do not climb
up, grabbing the top of the HDTV and pulling it onto themselves.
Fix one end of the strap to the wall. If you have a drywall finish it is
preferable to fix it to a stud if it is a drywall finish, using a washer
underneath the screw head. If you have a solid wall you should use a lag
bolt, again using a washer under the nut.
Fix the other end of the Safety Strap to
one of the upper wall mounting holes on
the back of the HDTV, using a washer
under the screw head.