Western Telematic NPS-2HD - Manual (Page 23)

5-3
Configuration
Network Power Switch v1.00 Site: WESTERN TELEMATIC, INC.
Commands:
Display
/H Display this Help Screen
/S[P] Display Plug Status, [P] with Passwords
Configuration
/G View/Set General Parameters
/P [n] View/Set Plug Parameters
/N View/Set Network Parameters
/DL Download Configuration to File
Control +------------------------------------+
/D Set Plugs to Default Settings | [n] = Optional Plug Name or Number |
/Boot <n> Boot Plug n | <n> = Required Plug Name or Number |
/On <n> Turn On Plug n | n+n = Plug n and Plug n |
/Off <n> Turn Off Plug n | n:n = Plug n through Plug n |
/T Reset Network Interface | * = All Plugs with Access |
/R Relogin as Different User +------------------------------------+
/X Exit/Disconnect
Figure 5.1: System Help Screen
Network Power Switch v1.00 Site: WESTERN TELEMATIC, INC.
Commands:
Display
/H Display this Help Screen
/S Display Plug Status
Control
/D Set Plugs to Default Settings
/Boot <n> Boot Plug n
/On <n> Turn On Plug n
/Off <n> Turn Off Plug n
/X Exit/Disconnect
+------------------------------------+
| <n> = Required Plug Name or Number |
| n+n = Plug n and Plug n |
| n:n = Plug n through Plug n |
| * = All Plugs with Access |
+------------------------------------+
NPS>
Figure 5.2: User Help Screen