Weider 831.159830 - Manual (Page 10)

10
13. Slide six Weights (41) onto the Right Weight
Guides (26). Make sure the Weights are turned
so the pin grooves are on the bottom.
Press a Weight Tube Bumper (45) into the lower
end of the Short Weight Tube (44). Slide the
Short Weight Tube into the center holes in the
Weights (41).
Slide a Top Weight (42) onto the Right Weight
Guides (26). Note: Make sure the Top Weight is
turned so the groove fits over the welded pin
on the Short Weight Tube (44).
42
44
26
41
45
Pin
Grooves
Welded
Pin
13
14
14. Slide the Bottom Weight (47) and seven Weights
(41) onto the Left Weight Guides (27). Make sure
the Weights are turned so the pin grooves are
on the bottom.
Press a Weight Tube Bumper (45) into the lower
end of the Long Weight Tube (43). Slide the Long
Weight Tube into the center holes in the Weights
(41).
Slide the other Top Weight (42) onto the Left
Weight Guides (27). Note: Make sure the Top
Weight is turned so the groove fits over the
welded pin on the Long Weight Tube (43).
27
Welded
Pin
Pin
Groove
42
41
43
45
47