Weider WESY93190 - Manual (Page 20)

56. Locate and open the parts bag labeled ÒSEAT
ASSEMBLY.Ó
Attach the Small Backrest (18) to the Ab Upright (1)
with two 1/4Ó x 2 1/2Ó Machine Screws (64) and two
1/4Ó Washers (37).
54. Wrap the Low Cable (86) around a 3 1/2Ó Pulley (82)
in the direction shown. Attach the Pulley and two
Pulley Covers (94) to the indicated hole in the Ab
Upright (1) with a 3/8Ó x 3 3/4Ó Bolt (76), two 3/8Ó
Washers (38) and a 3/8Ó Nylon Locknut (42). Orient
the wide tab on the Pulley Covers as shown.
54
56
20
SEAT ASSEMBLY
1
18
76
38
94
82
94
38
42
37
64
53. Wrap the Low Cable (86) around a 3 1/2Ó Pulley (82)
in the direction shown. Attach the Pulley and two
Pulley Covers (94) to the indicated hole in the Leg
Lever (15) with a 3/8Ó x 3 3/4Ó Bolt (76), two 3/8Ó
Washers (38) and a 3/8Ó Nylon Locknut (42). Orient
the wide tab on the Pulley Covers as shown.
53
86
38
94
82
42
38
15
76
Wide Tab
Wide Tab
55. Route the Low Cable (86) through the slot in the Rear
Seat Frame (16) and place it in the bracket on the
Weight Base (14).
Attach a 3 1/2Ó Pulley (82) inside the bracket on the
Weight Base (14) with a 3/8Ó x 1 3/4Ó Bolt (66) and a
3/8Ó Nylon Locknut (42). Orient the wide tab on the
Pulley Covers as shown.
55
Slot
Bracket
14
66
82
42
30
16