Weider WESY93190 - Manual (Page 7)

8. Slide a Weight Bumper (27) onto each of the Weight
Guides (23).
Slide eight Weights (90) onto each set of Weight
Guides (23). Make sure the pin grooves are on the
indicated side of each stack of Weights.
9. Press a Weight Tube Bumper (26) into each Weight
Tube (25).
Insert a Weight Tube (25) into each stack of Weights
(90). Make sure the pins on the Weight Tubes are
in the pin grooves in the upper Weights.
7. Insert two Weight Guides (23) into one of the brack-
ets on the Weight Base (14). Attach the lower ends of
the Weight Guides with a 5/16Ó x 6Ó Bolt (67), two
1/2Ó x 3/4Ó Spacers (69), and a 5/16Ó Nylon Locknut
(40). Do not overtighten the Nylon Locknut.
Attach the other Weight Guides (23) in the same
manner.
9
8
7
90
90
Pin
Grooves
27
27
23
23
26
25
Pin
Grooves
Pin
Grooves
90
90
7
67 69
23
23
40
14